PRODUCT INTRODUCTION
Home
Product Introduction
AC/DC Enclosed Type
UHP Series
Model
UHP-200(R) / UHP-200A / UHP-350(R)
UHP-500(R) / UHP-750 / UHP-1000
UHP-1500 / UHP-1500-HV / UHP-2500
WATTAGE:
200W~2500W
FEATURES:
Slim and Low profile
Fanless design,free air convection
Built-in active PFC function150%
Peak load capability(100ms)
High voltage output available for HV type
Operating altitude up to 5000 meter
DC OK active signal and redundant function(option)
LED indicator for power on
Peripheral
Model
ERDN-20 / ERDN-40
WATTAGE:
NA
FEATURES:
20A/40A Power Supply Redundancy Module
Supports system 1+1 and 1+N redundancy
Two DC input contacts and single output
Built-in two channels DC OK relay contacts for monitoring power status
LRS Series
Model
Single Output:
LRS-35 / LRS-50 / LRS-75 / LRS-100 / LRS-150
LRS-150F / LRS-200 / LRS-350 / LRS-450
LRS-600
200% Peak Power:
LRS-100N2 / LRS-200N2 / LRS-350N2
LRS-600N2
WATTAGE:
35W~600W
FEATURES:
Non-PFC, most economical models
Ultra compact and 1U low profile
300VAC input surge
No load power consumption: 0.2W~0.75W
5G vibration, 70℃ operation
Operating altitude up to 5000 meters
G3 Series
Model
Single: RS-15 / RS-25 / RS-35 / RS-50 / RS-75 RS-100 / RS-150
Dual: RD-35 / RD-50 / RD-65 / RD-85 / RD-125 RID-50 / RID-65 / RID-85 / RID-125
Triple: RT-50 / RT-65 / RT-85 / RT-125
Quad: RQ-50 / RQ-65 / RQ-85 / RQ-125
WATTAGE:
15W~150W
FEATURES:
Miniature size, non-PFC
5G vibration, 70℃ operation
300VAC input surge
Suitable for critical applications
2 outputs are isolated for RID series
Moving Sign Series
Model
Single Output with PFC:
LSP-160 / HSP-200 / UHP-200A
HSP-300 / ERPF-400
Single Output without PFC:
HSN-300 / NEL-400 / ERP-200 / ERP-350
WATTAGE:
150W~400W
FEATURES:
Light weight and low profile
Suitable for high efficiency moving sign applications
Conformal coating (HSP, HDP, NEL, HSN series)
Semi-potted and design against rain splash (ERP Series)
SE Series
Model
SE-450 / SE-600 / SE-1000 / SE-1500
WATTAGE:
100W~1500W
FEATURES:
Non-PFC
Economical medium to high power models
PFC Series
Model
Single: PSP-600 / PSPA-1000
Quad: QP-150 / QP-200 / QP-320
WATTAGE:
150W~1000W
FEATURES:
Built-in active PFC function
Full range input, complete functions
RSP-75~500 Series
Model
RSP-75 / RSP-100 / RSP-150
RSP-200 / RSP-320 / RSP-500
WATTAGE:
75W~500W
FEATURES:
1U Low profile with active PFC function: 75W~320W: 30 mm, 500W: 40.5 mm
Built-in constant current limiting circuit (RSP-75/100/150)
Built-in remote ON/OFF control (RSP-75/100/150/500)
Built-in remote sense (RSP-500 only)
NSP Series
Model
NSP-1600 / NSP-3200
WATTAGE:
1600W~3200W
FEATURES:
Input, output and safeties are refer to RSP or DPU series, enable fast design in and win
Environment friendly production process and material selection
Universal input 90~264Vac
Maximum efficiency up to 94.5%
Built-in PV function
Design refer to SEMI F47@200Vac
HRP Series
Model
Single Output：
HRP-75 / HRP-100 / HRP-150 / HRPG-150
HRP-200 / HRPG-200 / HRP-300
HRPG-300 / HRP-450 / HRPG-450
HRP-600 / HRPG-600 / HRPG-1000
350% peak power:
HRP-150N3 / HRP-300N3 / HRP-600N3
HRPG-1000N3
WATTAGE:
75W~1000W
FEATURES:
Built-in active PFC function
High efficiency, no load power consumption <0.5W~0.75W
5 years warranty
MSP Series
Model
MSP-100 / MSP-200 / MSP-300
MSP-450 / MSP-600 / MSP-1000
WATTAGE:
100W~1000W
FEATURES
Medical level, built-in active PFC
Medical safety approved (MOOP level)
High efficiency, no load power consumption<0.5W~0.8W
5 years warranty
AC/DC DIN Rail
HDR Series
Model
HDR-15 / HDR-30 / HDR-60 / HDR-100
HDR-150
WATTAGE:
15W~150W
FEATURES:
Plastic case, step shape
1∅, full range input
Compact size, 1SU~6SU width (DIN EN43880)
Isolation class II
DC output voltage adjustable
No load power consumption <0.3W
Assemble on industrial rail TS-35 / 7.5 or 15
Suitable for building automation and control of household appliance
MDR Series
Model
MDR-10 / MDR-20 / MDR-40 / MDR-60 MDR-100
WATTAGE:
10W~96W
FEATURES:
Plastic case, ultra slim
1∅, full range input
No load power consumption<0.75W~1W
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in active PFC function
DC OK signal output (MDR-10/20)
DC OK relay contact (MDR-40/60/100)
Class I, Div 2 Hazardous Locations T4 (MDR-40/60)
DRA Series
Model
DRA-40 / DRA-60
WATTAGE:
40W~60W
FEATURES:
Plastic case
1∅, full range input
Io can be adjusted 10~100% by 1~10VDC, PWM signal or resistance
Assemble on industrial rail TS-35 / 7.5 or 15
Suitable for machine vision inspection system and plant cultivation applications
EDR Series
Model
EDR-75 / EDR-120 / EDR-150
WATTAGE:
75W~150W
FEATURES:
Metal case, low cost
1∅, full range input
Slim size, model width: 32 ~ 40mm
EMC EN55022 class A
Assemble on industrial rail TS-35 / 7.5 or 15
2 years warranty
NDR Series
Model
NDR-75 / NDR-120 / NDR-240 / NDR-480
WATTAGE:
75W~480W
FEATURES:
Metal case, economical models
1∅, 90~264Vac, full range input
Slim size, model width: 32 ~ 85.5mm
EMC EN55022 class B
Assemble on industrial rail TS-35 / 7.5 or 15
3 years warranty
SDR Series
Model
SDR-75 / SDR-120 / SDR-240 / SDR-480
SDR-480P / SDR-960
WATTAGE:
75W~960W
FEATURES:
Metal case, slim size
1∅, full range input (230VAC only for SDR-960)
94% high efficiency and complete functions
Built-in active PFC function (except SDR-75)
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact (except SDR-75)
130%~150% peak load capability by models
Current sharing function (SDR-480P/960)
TDR Series
Model
TDR-240 / TDR-480 / TDR-960
WATTAGE:
240W~960W
FEATURES:
Metal case, slim size
3∅, 340~550VAC input
High efficiency up to 94.5%
Built-in active PFC function
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact
WDR Series
Model
WDR-60 / WDR-120 / WDR-240 / WDR-480
WATTAGE:
60W~480W
FEATURES:
Metal case, slim size
1∅ and 2∅ , 180~550VAC wide input
High efficiency up to 93%
Built-in active PFC function (240W & 480W)
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact
Peripheral
Model
Redundancy Module 40A: DRDN40
Buffer Module: DBUF20 / DBUF40
DIN-Rail: ICL-16R / ICL-28R
Linear Shape: ICL-16L / ICL-28L
Redundancy Module 20A: DRDN20
UPS: DR-UPS40 / DUPS20 / DUPS40
WATTAGE:
NA
FEATURES:
20A redundant module
20A/40A DIN Rail Buffer Module
20A/40A DC UPS module
AC Inrush Current Limiter
AC/DC Open Frame
Low Profile PCB Type
Model
LOP-200 / LOP-300 / LOP-400
LOP-500 / LOP-600
WATTAGE:
200W~600W
FEATURES:
MEAN WELL Patent Number: ZL 202223277512.1
4"x2" & 5"x3" compact size with low profile (25.4mm~33.5mm)
Global certificates in multi-fields (ITE 62368-1, Medical 60601-1, Household 60335-1, Industrial 61558-1/-2-16)
150% peak load @3s
Suitable for Class I or Class II installations
Over voltage category III (OVC III)
-40℃ ~ +80℃ wide range operation temperature
Medical - PCB Type
Model
Single:
RPS-30 / RPS-45 / RPS-60 / RPS-65 / RPS-75 RPS-120 / RPS-120S / RPS-160 / RPS-200
RPS-300 / RPS-300-C / RPS-400 / RPS-500
Dual: RPD-60 / RPD-75
Triple: RPT-60 / RPT-75 / RPT-160
Quad: MPQ-200
WATTAGE:
30W~500W
FEATURES:
Compact size
PCB type, non-PFC for small wattage models
Medical safety approved (2xMOPP)
Low leakage current
Suitable for BF application with appropriate system consideration for selected models
Industrial - Green PCB Type
Model
2.5" x 1.8": EPS-15
3" x 2":
EPS-25 / EPS-35 / EPS-45S / EPS-65S / EPP-120S
4" x 2":
EPS-45 / EPS-65 / EPS-120 / EPP-100 / EPP-150 / EPP-200
5" x 3":
EPP-300 / EPP-400 / EPP-500
Others: ELP-75
WATTAGE:
15W~500W
FEATURES:
3" x 2", 4" x 2", 5" x 3" complete sizes for choice
PFC models: EPP, ELP series; Non-PFC models: EPS series
No load power consumption <0.1W~0.5W
Suitable for ErP regulated end systems
Industrial - PCB Type
Model
Single:
PS-05 / LPS-50 / LPS-75 / LPS-100 / LPP-100 / LPP-150
Dual:
PD-25 / PD-45 / PD-65 / RPD-65 / PID-250
Triple:
PT-45 / PT-65 / PT-6503 / RPT-65 / PPT-125
WATTAGE:
5W~250W
FEATURES:
PCB type, non-PFC for small wattage models
Multiple form factors for different installations: 7" x 4.25”, 5” x 3”, 4” x 2”, slim type
Industrial - On Board Type
Model
IRM-01 / IRM-02 / IRM-03 / IRM-05 / IRM-10 / IRM-15 / IRM-20 / IRM-30 / IRM-45 / IRM-60 / IRM-90
WATTAGE:
1W~90W
FEATURES:
Assemble on the main PCB of the system
Miniature encapsulated type
No load power consumption<0.075W~0.1W
Working temperature:-30~+85℃ by models
Comply with EN55022 class B without any additional components
Various styles: PIN, SMD, Screw terminal style
Medical - On Board Type
Model
Encapsulated Type:
MPM-05 / MPM-10 / MPM-15 / MPM-20 / MPM-30 / MPM-45 / MPM-65 / MPM-90
PCB Type:
MFM-05 / MFM-10 / MFM-15 / MFM-20 / MFM-30
WATTAGE:
5W~90W
FEATURES:
Assemble on the main PCB of the system
Medical safety approved (2xMOPP)
Suitable for BF application with appropriate system consideration
AC/DC Security&Specific
HEP Series
Model
Single：HEP-100 / HEP-150 / HEP-185
HEP-240 / HEP-320 / HEP-480
HEP-600 / HEP-1000 / HEP-2300
HEP-2300-HV
WATTAGE:
100W~2300W
FEATURES:
Fanless design
High efficiency up to 96%
Wide working temperature range -55~+70℃
Rugged metal case with IP65 design (IP68 option availab
le), withstand 10G vibration
Operating altitude up to 5000 meters
Build-in CANBus and PMBus /MODBus by optional (1000W
and 2300W only)
Suitable for high/low temperature, high dust, high moisture,
high vibration, high salt outdoor or harsh environment
6 years warranty
Security—DRS Series
Model
DRS-240 / DRS-480
WATTAGE:
240W & 480W
FEATURES:
Universal input 90~305VAC (277VAC available)
All-in-one function with Power supply, DC-UPS, battery
charger and status monitoring in ONE compact unit
Signal and alarms design meet UL2524, NFPA1221, BS
EN/EN54-4 and GB17945 requirement
Form C relay contacts and LED indicators for AC Fail,
Battery Low, Charger Fail, and DC-OK
Built-in MODBus protocol, CANBus optional
Charging curve can be set with SBP-001
Security—PSC Series
Model
PSC-35 / PSC-60 / PSC-100 / PSC-160
WATTAGE:
35W~160W
FEATURES:
With UPS function (need external batteries)
Suitable for security industry or battery backup systems
Built-in active PFC function (PSC-160)
Case available
Security—DRC Series
Model
DRC-40 / DRC-60 / DRC-100 / DRC-180
WATTAGE:
40W~180W
FEATURES:
With UPS function (need external batteries)
Suitable for security industry or battery backup systems
Assemble on industrial rail TS-35 / 7.5 or 15
SCP & AD/ ADS/ ADD/ LAD Series
Model
Single: LAD-120 / LAD-240 / LAD-360
LAD-600 / SCP-35 / SCP-50 / SCP-75
Dual: AD-55 / ADS-55 / AD-155 / ADS-155
Triple: ADD-55 / ADD-155
WATTAGE:
35W~600W
FEATURES:
With UPS function (need external batteries) for AD/ADD series
The LAD series has UART communication function, and posses
AC and battery circuit switches with design refer to GB 17945-
2010 safety regulations
Suitable for security industry or battery backup systems
AC/DC Programmable Power
SHP Series
Model
SHP-10K-HV / SHP-30K-HV
WATTAGE:
10000W~30000W
FEATURES:
3ψ 3-wire without neutral / 340~530VAC wide input range
Water / forced air cooling selectable
Built-in CANBus/Optional PMBus protocol/MODBus-RTU/RS-485
Output voltage and constant current level programmable
Active current sharing up to 4 units
Built-in remote ON-OFF control / Auxilary power / Alarm signal
5 years warranty
CSP Series
Model
CSP-3000
WATTAGE:
3000W
FEATURES:
Full range 180~264VAC input
Built-in active PFC function
High efficiency up to 93%
Built-in DC fans for forced air cooling
Output voltage/current programmable
Active current sharing up to 9000W(2+1)
Built-in remote ON/OFF control / Auxiliary power / power
OK signal
Protections: short circuit/over current/over voltage/
over temperature/ fan failure
5 years warranty
PHP Series (Water-cooled)
Model
PHP-3500 / PHP-3500-HV
WATTAGE:
3500W
FEATURES:
Water-cooled heat dissipation technology
Output voltage and constant current level programmable
Support PMBus communication protocol (CANBus optional)
Support PSUs in parallel connection
High output voltage available for HV type
Active current sharing, total system power up to 14000W (3+1)
Optional cold plate for quick implementation,ordering no.:
HS-656
DPU Series
Model
DPU-3200
WATTAGE:
3200W
FEATURES:
Universal AC Input/ Full Range
Built-in Active PFC
High efficiency up to 94.5%
Air cooling by built-in DC fan
Output voltage and constant current level programmable
Built-in OR-ing FET, support hot swap (hot) plug function
Protection: Short Circuit/ Overload / Over voltage/
Over temperature
Optional conformal coating
Safety approval: UL/TUV/EAC/CE/CB
SPV Series
Model
SPV-150 / SPV-300
WATTAGE:
150W~300W
FEATURES:
Built-in active PFC function
Output voltage programmable from 20~110%
RST Series
Model
RST-5000 / RST-10000 / RST-7K5 / RST-15K
WATTAGE:
5000W~15KW
FEATURES:
Single output power supply with 5000W / 10000W high wattage
3 phase input:3-wire / △196~305VAC or 4-wire / Y340~530VAC
Built-in active PFC function
High efficiency up to 91%
20000W with built-in parallel (active current sharing) function
Output voltage and constant current level programmable
5 years warranty
RSP-750~3000 Series
Model
RSP-750 / RSP-1000 / RSP-1500 / RSP-1600 RSP-2000 / RSP-2400 / RSP-3000
WATTAGE:
750W~3000W
FEATURES:
Programmable high power with active PFC function
Output voltage programmable
Constant current level Icc programmable (RSP-750/1600 only)
1U low profile (41mm) : RSP-750/1000/1600/2000,
2U
profile : RSP-1500/2400/3000
Built-in current sharing (except RSP-750)
5 years warranty
AC/DC Rack Power
RCP Series
Model
Power: RCP-1000 / RCP-1600 / RCP-2000
Charger: RCB-1600
Rack: RCP-1U / RHP-1U / RKP-1U
Controller & Monitor: RCP-MU / RKP-CMU1
WATTAGE:
1000W~18000W
FEATURES:
Complete rack mountable front end solution: rectifier and charger
1U low profile
19 inch rack shelf available
NCP Series
Model
NCP-3200
WATTAGE:
3200W
FEATURES:
Power supply or charger mode selectable by PMBus, CANBus
or SBP-001 (only for 24 V/48V models)
Built-in 2/3 stage charging curves and programmable curve
(only for 24V/48V models)
High efficiency up to 94.5%
Built-in OR-ing FET or Diode, support hot swap (hot plug)
Active current sharing up to 10 rack shelves(DHP-1UT-B) and
the maximum power supply that can be connected in
parallel is 40 units
Built-in I2C interface, support PMBus/CANBus protocol Built-
in intelligent fan speed control
CMU2 Series
Model
CMU2
WATTAGE:
NA
FEATURES:
Integration on system power
2 models in 3U 19-inch rackmount and standalone configurations
7" touch Panel and buttons for easy on-site operation
Ethernet port for on-site or remote monitor and control over
the system
Selectable PMBus, CANbus, RS-485, and RS-232 communication protocols
Web-based monitor/control UI provided for various applications
DRP Series
Model
Power: DRP-3200
Shelf: DHP-1UT / DHP-1UT-B
Charger: DBR-3200
WATTAGE:
3200W
FEATURES:
Complete rack mountable front end solution: rectifier and charger
1U low profile
19 inch rack shelf available
AC/DC Configurable-Modular Power Supply
NMP Series
Model
NMP650 / NMP1K2
WATTAGE:
650W/1200W
FEATURES:
Medical (2x MOPP) ITE safety approvals
Suitable for BF application with appropriate system
consideration (Touch current < 100uA/264VAC)
1U low profile
Built-in parallel function / output programmable / global enable
/ remote local ON-OFF / auxiliary DC output / over
temperature alarm / DC OK
Cooling by thermostatically controlled fan with fan alarm function
5 years warranty
UMP Series
Model
UMP-400
WATTAGE:
400W
FEATURES:
Fan-less, 1U design
Modular design, with DC-DC module cards (NID35/65/100
series models)
Can be used as a single rail PSU
wide operating temperature ranges from -30 ~ +70 ° C
Meet OVC III requirements
Meet 2x MOPP isolation requirements, ideal for BF rated
medical equipment
MP Series
Model
MP450 / MP650 / MP1K0
WATTAGE:
450W/650W/1000W
FEATURES:
Configurable/customizable/flexible power supply
Built-in active PFC function
5 slot output for MP450/650, 7 slot output for MP1k0
75W/100W/150W/210W/300W/360W module available
AC/DC Charger
Programmable Desktop Charger
Model
Power: ENP-120 / ENP-180 / ENP-240 / ENP-360
Charger: ENC-120 / ENC-180 / ENC-240 / ENC-360
WATTAGE:
120W~360W
FEATURES:
ENC: Programmable charger
ENP: Level VI desktop switching power supply
Charging voltage, charging current and timeout can
be programmed through SBP-001
NTC for temperature compensation (ENC series)
Fanless design, and noise free
Protections: Short circuit, over voltage, over
temperature protection (ENC/ENP series). Battery under
voltage, battery over voltage, reverse polarity protection(only
for ENC series)
Suitable for lead-acid batteries
3 years warranty
Adaptor Charger
Model
Class II: GC30B / GC30E / GC30U
Class I: GC120 / GC160 / GC220 / GC330
WATTAGE:
30W~330W
FEATURES:
Fanless design with plastic enclosure, leading lower touch temperature
2 Stage charging (C.C./C.V.)
No load power consumption<1W, and low carbon emission
AC inlet
A type：IEC320-C14; B type：IEC320-C8; E type: EU plug;
U type: US plug
Standard DC output plug (Optional plugs are available)
2 years warranty
Metal Enclosure Charger
Model
NPB-120 / NPB-240 / NPB-360
WATTAGE:
120W~360W
FEATURES:
Standard type highly reliable wide voltage range charger
Metal enclosure for better heat dissipation , leading lower
touch temperature
Easy and flexible adjustment:
‧ Charging voltage adjustable through front panel
(10.5~15.2V, 21~30.4V, 42~60.8V)
‧ Charging current adjustable through panel (50~100% of
rated current)‧ 2 or 3 stage selectable by DIP S.W. on front panel
Protections: Short circuit, over voltage, over temperature,
battery reverse polarity
Multiple DC output plugs selectable: Anderson, terminal
block and 4 pin power pin
Intelligent Chargers
Model
NPB-450 / NPB-750 / NPB-1200 / NPB-1700
WATTAGE:
450W~1700W
FEATURES:
Intelligent general type highly reliable and wide output
range charger
Ultra wide charging range auto sensing function [10.5
~21V, 21~42V, 42~80V, 54~100V (NPB-450 only)]
Built-in CANbus protocol
Charging voltage, charging current and timeout can
be programmed through SBP-001
Charging current adjustable through panel (50~100% of
rated current)
Built-in CANbus protocol
Suitable for lead-acid and lithium batteries
2 in 1 Models Charger
Model
NPP-450 / NPP-750 / NPP-1200 / NPP-1700
WATTAGE:
450W~1700W
FEATURES:
Can easily switch between charger and power supply
Charging voltage adjustable through panel [10.5~21V,
21~42V, 42~80V, 54~100V(NPB-450 only)]
Charging current adjustable through panel (50~100% of
rated current)
3 stage charging, only suitable for lead-acid batteries
Protections: Short circuit, over voltage, over temperature
Optional hand carry handle (Order No.: Carry Handle)
Miniaturized High-Power Intelligent Chargers
Model
RPB-1600 / RCB-1600 / DBU-3200 / DBR-3200
WATTAGE:
1600W~3200W
FEATURES:
High power density up to 37W/inch3
Built-in I2C interface, PMBus protocol (Optional
CANBus protocol)
Output voltage/current, 2 or 3 stage charging curve, and
timeout can be programmed through SBP-001
Charging voltage 75%~125% (10.8~18V,21.6~36V,
43.2~72V) can be adjusted via external 1~5Vdc
Charging current 20~100% can be adjusted via external 1~5Vdc
Active current sharing up to 25600W
Protections: Battery under voltage, battery disconnect,
short circuit, over voltage, over temperature
Harsh Environment Charger
Model
HEP-600C
WATTAGE:
600W
FEATURES:
Fully potted and fanless design with aluminum enclosure
-40~+70oC wide operating temperature
Withstand 10G vibration test
Output voltage (11.5~15.1V, 23~30.2V, 46.1~60.5V) can
be adjusted through internal potentiometer
Output current 50~100% can be adjusted through
internal potentiometer
Protections: Short circuit, over voltage, over temperature
6 years warranty
Smart Battery Charging Programmer
Model
SBP-001
WATTAGE:
NA
FEATURES:
This programmer is able to work with computer and
change the related charging parameter with simple
connection (connection wire included). In addition,
external power supply or battery is not needed when
modifying the charging parameters.
AC/DC Adaptor
Wall-mounted (Level VI) — ITE / Medical / Household / Industrial
Model
NGE12 / NGE18 / NGE30 / NGE45 / NGE65 NGE90
WATTAGE:
12W~90W
FEATURES:
Interchangeable AC plug
Global certificates in multi-fields
(ITE 62368-1, Medical
60601-1, Household 60335-1,Industrial 61558-1/-2-16)
Extremely leakage current <100uA
2xMOPP, BF applications
80~264Vac input
No load power consumption <0.075W~0.1W
Energy efficiency Level VI
Protections: Short circuit/ Overload/ Over voltage
Wall-mounted (Level VI) — ITE 4-Port USB GaN Fast Charger
Model
NGE100
WATTAGE:
100W
FEATURES:
One model for multi-devices
USB-2C2A, independent 4-port fast charging
Auto-detection 5V/ 9V/ 12V/ 15V/ 20V
Protections: Short circuit/ Overload/ Over temperature
No load power consumption <0.3W
Type-C cable with charging and data transmission
included (100cm)
Wall-mounted (Level VI) — ITE
Model
GE12I / GE18I / GE24I / GE30I / GE40I
WATTAGE:
12W~40W
FEATURES:
Interchangeable AC plug
90~264Vac input
No load power consumption <0.075W
Protections: Short circuit/ Overload/ Over voltage
-10~+50℃ working temperature
Wall-mounted (Level VI) — Medical
Model
GEM06I / GEM18I / GEM12I / GEM30I GEM40I / GEM60I
WATTAGE:
6W~60W
FEATURES:
Interchangeable AC plug
Medical 60601-1/-11 approved (2xMOPP), BF applications
No load power consumption <0.075W~0.15W
Protections: Short circuit/ Overload/ Over voltage
-25~+70℃ working temperature
80~264Vac input
Energy efficiency level VI (5~9V for level V)
Wall-mounted (Level VI) — ITE
Model
Extreme Small (USA 2 Pin):
SGAS06U / SGAS15U / SGAS60U
Slim (EURO 2 Pin):
SGA12E / SGA25E / SGA40E / SGA60E
Fixed (EURO 2 Pin):
GS05E-USB / GS06E / GST18E / GST25E
GST36E
WATTAGE:
5W~60W
FEATURES:
ITE 62368-1 approved
90~264Vac input
No load power consumption <0.075W~0.15W
Protections: Short circuit/ Overload/ Over voltage
2 pole USA plug(U type) / EURO plug(E type)
-30~+70℃ working temperature
Wall-mounted (Level VI) — Medical
Model
Fixed (USA 2 Pin)：
GSM06U / GSM12U / GSM18U
GSM25U / GSM36U / GSM60U
Fixed (EURO 2 Pin):
GSM06E / GSM12E / GSM18E
GSM25E / GSM36E / GSM60E
WATTAGE:
6W~60W
FEATURES:
Interchangeable AC plug
Medical 60601-1/-11 approved (2xMOPP), BF applications
No load power consumption <0.075W~0.15W
Protections: Short circuit/ Overload/ Over voltage
-25~+70℃ working temperature
80~264Vac input
Energy efficiency level VI (5~9V for level V)
Desktop (Level VI) — ITE
Model
Extreme Small (Class I): SGAS15A
Extreme Small (Class II): SGAS15B
Class I: GST18A / GST25A / GST40A GST60A / GST90A / GST120A
GST160A / GST220A / GST280A
GST360A
Class II: GST18B / GST25B / GST36B GST360B
Triple Vo: GP25A / GP25B / GP50A
WATTAGE:
15W~360W
FEATURES:
Interchangeable AC plug
90~264Vac input
No load power consumption <0.075W
Protections: Short circuit/ Overload/ Over voltage
-10~+50℃ working temperature
Desktop (Level VI) — Medical
Model
Class I: GSM40A / GSM60A / GSM90A
GSM120A / GSM160 / GSM220A
Class II: GSM18B / GSM25B / GSM36B
GSM40B / GSM60B / GSM90B
GSM120B / GSM160B / GSM220B
WATTAGE:
18W~220W
FEATURES:
Medical 60601-1 approved (2xMOPP),
BF application
(B type only)
No load power consumption <0.1W~0.15W
Comply with EISA/DoE, NRCan, ErP and meet CoC Version 5
A type: Class I (with FG), IEC320-C14; B type: Class II
(without FG), IEC320-C8
Extremely leakage current<50~175uA by model
-30~+70℃ working temperature
Moistureproof - Desktop
Model
USA 2 Pin: OWA-60U / OWA-90U
OWA-120U / OWA-200U
EURO 2 Pin: OWA-60E / OWA-90E
OWA-120E / OWA-200E
WATTAGE:
60W~200W
FEATURES:
IP67 design for power body
No load power consumption <0.15W
E-Type: EU ErP and meet CoC Version 5 (OWA-60E/90E);
U-Type: EISA 2007/DoE and NRCan
Class II (no FG)
AC/DC Green Bidrectional Power
BIC Series
Model
BIC-2200
WATTAGE:
2200W
FEATURES:
1U low profile design
Full digital design with 93% conversion efficiency for both
AC/DC and DC/AC conversion
Ultrafast switching time between AC/DC and DC/AC of 1ms.
Active current sharing up to 11000W(4+1)
< 3% Low THD in both conversion mode
Force charging and recycle mode with CANbus commend(Optional)
Complete protections: Anti-islanding protection, AC
fail protection, DC OVP, OLP, OCP, OTP
ERS Series
Model
ERS-1400
WATTAGE:
1400W
FEATURES:
Wide input voltage range 10~60VDC / 60~380VDC by models
High efficiency up to 91%
Modular design for flexible configuration
Flexible CC/CV/CP operation modes
Remote control and monitoring by CANBus protocol via
CMU2A control console
Maximum 64 units ERS-1400 series that can be connected
Protections: Over voltage/ Under voltage/ Over temperature
/ Communication error
ERG Series
Model
ERG-5000(H)
WATTAGE:
5000W
FEATURES:
Wide input voltage range 10~60VDC / 60~420VDC by models
Modular design for flexible configuration
Flexible CC/CV operation modes
Remote control and monitoring by CANBus protocol via
CMU2A control console
Maximum 64 units ERG-5000 series that can be connected