PRODUCT INTRODUCTION
Home
Product Introduction
LED Driver Indoor Constant Current
APC Series
Model information
APC-8 / APC-12 / APC-16 / APC-25 / APC-35
WATTAGE:
8W~35W
FEATURES:
90~264VAC input
Rectangular plastic case with IP42 level
Class II design, without FG
Low cost, small and compact size
Constant current mode for APC series
Suitable for indoor LED lighting and moving sign applications
HLN Series
Model information
HLN-40H / HLN-60H / HLN-80H
WATTAGE:
40W~80W
FEATURES:
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP64 level
Built-in 3 in 1 dimming function (1~10VDC, PWM signal
or resistance) for B type
User adjustable output voltage and current level for A type
Suitable for indoor LED lighting and moving sign applications
LCM Series
Model information
3 in 1 Dimming: LCM-25 / LCM-40(EO) / LCM-60(EO)
DALI Dimming: LCM-25DA / LCM-40DA / LCM-40TW / LCM-60DA
WATTAGE:
25W~60W
FEATURES:
180~295VAC input for 40W/60W, 180~277VAC input for 25W
Built-in active PFC function
Multiple-stage output current level selectable by DIP switch
Built-in 3 in 1 dimming function for non DA type (0~10
VDC, PWM signal or resistance, dim-to-off)
Built-in DALI interface and push dimming function for DA type
DALI device type 6 (DT6) and device type 8 (DT8) available
for LCM-40TW
Suitable for indoor LED lighting applications
LPC Series
Model information
LPHC-18 / LPC-20 / LPC-35 / LPC-60 / LPC-100 / LPC-150
WATTAGE:
18W~150W
FEATURES:
90~264VAC input (except for 18W and 150W)
Slim plastic case with IP67 level
Economical design
Withstand 300VAC surge input for 5 seconds (LPV/C
-20/35/60/100)
-30~70℃ wide operation range
Suitable for economical LED lighting and moving
sign applications
Suitable for economical LED lighting and moving
sign applications
NPF Series
Model information
C.V.+C.C.: NPF-40 / NPF-60 / NPF-90 / NPF-120 / NPF-200
C.C. (3 in 1 Dimming): NPF-40D / NPF-60D / NPF-90D / NPF-120D
WATTAGE:
40W~200W
FEATURES:
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level
No load/standby power consumption<0.15W (<0.5W for D type)
Built-in 3 in 1 dimming function (0~10VDC, PWM signal
or resistance, dim-to-off ) for D type
Suitable for LED lighting and moving sign applications
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries [NPF-40
(D)/-60(D)/-120(D) only]
PCD Series
Model information
PCD-16 / PCD-25 / PCD-40 / PCD-60
WATTAGE:
16W~60W
FEATURES:
16W/25W: 90~135VAC or 180~295VAC 40W/60W: 180~295VAC
AC phase-cut dimming, work with leading and trailing
edge TRIAC dimmers
Fully isolated plastic case with IP42 level
Built-in active PFC function
Class II design, without FG
Suitable for indoor LED lighting
PLC Series
Model information
C.C.： PLC-30 / PLC-45 / PLC-60
C.V.+C.C.： PLC-100
WATTAGE:
30W~96W
FEATURES:
90~264VAC input, built-in active PFC function
Fully isolated plastic case with screw terminal style of I/O
Suitable for indoor LED lighting and moving sign applications
PLD Series
Model information
PLD-16 / PLD-25 / PLD-40 / PLD-60
WATTAGE:
16W~60W
FEATURES:
16W: 90~135VAC or 180~295VAC; 25W: 90~295VAC;
40W/60W: 180~295VAC
Built-in active PFC function
Fully isolated plastic case with IP42 level
Class II design, without FG
Suitable for indoor LED lighting
PLM Series
Model information
PLM-12 / PLM-25
WATTAGE:
12W~40W
FEATURES:
110~295VAC input (180~295VAC input for E type)
Built-in active PFC function
Fully isolated plastic case with IP30 level
Class II design, without FG
Push terminal I/O
No load power consumption<0.5W
Suitable for indoor LED lighting
PLN Series
Model information
C.C.: PLN-20 / PLN-30 / PLN-45 / PLN-60
C.V.+C.C.: PLN-100
WATTAGE:
20W~96W
FEATURES:
90~295VAC input (90~277VAC for PLN-20), built-in active
PFC function
Fully isolated plastic case with IP64 level
Suitable for indoor LED lighting and moving sign applications
NHDD Series
Model information
NHDD-40
WATTAGE:
40W
FEATURES:
For DC 380V BUS lighting luminaire driver on board
(DoB) solution available
Plastic housing and fully encapsolated
Built-in PWM and remote ON/OFF control
Protections: Short circuit / Over temperature
5 years warranty
ELG-C Series
Model information
ELG-75-C / ELG-100-C / ELG-150-C / ELG-200-C / ELG-240-C
WATTAGE:
75W~240W
FEATURES:
100~305VAC input range
Built-in active PFC function
No load/standby power consumption <0.5W
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in
1 dimming (0~10Vdc or 10V PWM signal or resistance, dim
-to-off); smart timer dimming; DALI; auxiliary DC output (ELG
-150-C BE-Type)
Suitable for LED street lighting and outdoor LED lighting
LCM-U Series
Model information
3 in 1 Dimming： LCM-40U(EO) / LCM-60U(EO)
DALI Dimming： LCM-40UDA / LCM-60UDA
WATTAGE:
40W~60W
FEATURES:
90~132VAC input only
Built-in active PFC function
Multiple-stage output current level selectable by DIP switch
Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
Built-in DALI interface and push dimming function for DA type
Suitable for indoor LED lighting applications
LED Driver Indoor Constant Power
ELG-C Series
Model information
ELGC-300
WATTAGE:
300W
FEATURES:
100~132VAC input only
Built-in active PFC function
No load/standby power consumption <0.5W
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in
1 dimming (0~10Vdc or 10V PWM signal or resistance, dim
-to-off); smart timer dimming; DALI;
Suitable for LED street lighting and outdoor LED lighting
5 years warranty
HVG-C Series
Model information
HVGC-480 / HVGC-650 / HVGC-1000
WATTAGE:
480W~1000W
FEATURES:
Wide input range 180~528VAC
Metal case, IP67/IP65 design for indoor or outdoor installations
Built-in active PFC function
Function options: output adjustable via potentiometer; 3 in
1 dimming (0~10Vdc or 10V PWM signal or resistance, dim
-to-off); timer dimming; smart timer dimming
Suitable for LED street lighting and outdoor LED
lighting applications
5 years warranty
XLG Series
Model information
3-in-1 Dimming: XLG-20 / XLG-25 / XLG-50 / XLG-75 / XLG-100 / XLG-150 / XLG-200 / XLG-240 / XLG-320
WATTAGE:
20W~320W
FEATURES:
Wide input range 100~305VAC (90~305VAC for XLG-20)
Constant power mode with adjustable output current
(Constant current mode for XLG-20)
Built-in active PFC function and Efficiency up to 90%
Protections: Short circuit/ Over voltage/ Over temperature
Surge protection with 6KV(L/N-FG)/4KV(L-N); 4KV(L/N-FG)/2KV(L-N) for XLG-20
5 years warranty
LDC Series
Model information
LDC-35 / LDC-55 / LDC-80
WATTAGE:
35W~80W
FEATURES:
Flicker free design
3 in 1 dimming：0~10Vdc、PMW signal or resistance
Built-in active PFC function
No load power consumption <0.5W
working temperature： -25~+90℃
Protections: short circuit
UL/ENEC/TUV/CCC/CB/CE certified
LED Driver Indoor Constant Voltage
APV Series
Model information
APV-8 / APV-12 / APV-16 / APV-25 / APV-35
WATTAGE:
8W~35W
FEATURES:
90~264VAC input
Rectangular plastic case with IP42 level
Class II design, without FG
Low cost, small and compact size
Suitable for indoor LED lighting and moving sign applications
LPF Series
Model information
C.V.+C.C.： LPF-16 / LPF-25 / LPF-40 / LPF-60 / LPF-90
WATTAGE:
16W~90W
FEATURES:
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level (16W optional)
Class II design, without FG
Suitable for LED lighting and moving sign applications
LPV Series
Model information
C.V.+C.C.: LPF-16 / LPF-25 / LPF-40 / LPF-60 / LPF-90
C.C. (3 in 1 Dimming): LPF-16D / LPF-25D / LPF-40D / LPF-60D / LPF-90D
WATTAGE:
16W~90W
FEATURES:
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level (16W optional)
Class II design, without FG
Built-in 3 in 1 dimming function for D type (1~10VDC,
PWM signal or resistance)
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries (LPF-90/90D)
Build-in CANBus and PMBus /MODBus by optional (1000W
and 2300W only)
Suitable for LED lighting and moving sign applications
SLD Series
Model information
SLD-50 / SLD-80 / SLD-150
WATTAGE:
50~150W
FEATURES:
Wide input range 110~305VAC (120~305VAC for SLD-150)
Slim and linear housing design
Built-in active PFC function and efficiency up to 90% (up to 93% for SLD-150)
Design with class 2/II and SELV
Protections: Short circuit/ Over voltage/ Over temperature
3 years warranty
GSV Series
Model information
GSV30 / GSV60
WATTAGE:
30W~60W
FEATURES:
Class II/2 power unit, no FG
Built-in active PFC function with EN61347-1 regulation
No load power consumption<0.5W
PWM Series
Model information
PWM-40 / PWM-60(DA) / PWM-90(DA) / PWM-120(DA) / PWM-200
WATTAGE:
60W~200W
FEATURES:
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level
Class II design, without FG
No load power consumption<0.5W
Built-in 3 in 1 dimming function (0~10VDC, PWM signal
or resistance, dim-to-off)
Suitable for LED strip lighting
PWM-IoT Series
Model information
PWM-60-IoT / PWM-120-IoT / PWM-200-IoT
WATTAGE:
60W~200W
FEATURES:
Constant Voltage output with 12V/24V/48V
Flicker free design
Plastic housing and class II design without FG
Built-in active PFC function
Surge protection with 2KV(L-N)
Protections: Short circuit/Over voltage/Over temperature
LED Driver Indoor with Dimming
LPF Series
Model information
C.V.+C.C.: LPF-16 / LPF-25 / LPF-40 / LPF-60 / LPF-90
C.C. (3 in 1 Dimming): LPF-16D / LPF-25D / LPF-40D / LPF-60D / LPF-90D
WATTAGE:
16W~90W
FEATURES:
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level (16W optional)
Class II design, without FG
Built-in 3 in 1 dimming function for D type (1~10VDC,
PWM signal or resistance)
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries (LPF-90/90D)
Build-in CANBus and PMBus /MODBus by optional (1000W
and 2300W only)
Suitable for LED lighting and moving sign applications
PCD Series
Model information
C.C.： PCD-16 / PCD-25 / PCD-40 / PCD-60
WATTAGE:
16W~60W
FEATURES:
16W/25W: 90~135VAC or 180~295VAC 40W/60W: 180~295VAC
AC phase-cut dimming, work with leading and trailing edge TRIAC dimmers
Fully isolated plastic case with IP42 level
Built-in active PFC function
Class II design, without FG
Constant current mode
Suitable for indoor LED lighting
LED Driver Constant current DC/DC
LDB-L/LW Series
Model information
Buck-boost: LDB-L
WATTAGE:
300/350/500/600mA
FEATURES:
High efficiency up to 91%
Comply with EN55015 and FCC part 15 without additional input filter and capacitors
PWM dimming and remote ON/OFF control
Suitable for buck-boost type lighting systems (additional
mother board is required)
Pin, wire style for choice
LDH Series
Model information
Step-up: LDH-25 / LDH-45(DA) / LDH-65
WATTAGE:
350~1750mA
FEATURES:
Constant current output DC/DC step-up LED driver
High efficiency up to 95%
Comply with EN55015 without additional any components
PWM+analog dimming and remote ON/OFF control
Suitable for boost type lighting systems (Additional
mother board is required)
Pin, wire style for choice
LDD-L/ LDD-H/ LDDS-H/ NLDD-H Series
Model information
LDD-L / LDDS-H / LDD-H-DA / NLDD-H
WATTAGE:
300/350/500/600/700mA
FEATURES:
High efficiency up to 97%
PWM dimming and remote ON/OFF control
Protections: Short circuit / Over temperature
Cooling by free air convection
Fully encapsulated with IP67 level for pin and wire style
Fully encapsulated with IP67 level for pin and wire style
LED Driver PCB Type
PLP Series
Model information
C.C.: PLP-30 / PLP-60
WATTAGE:
30W~60W
FEATURES:
90~264VAC input , built-in active PFC function
Suitable for built-in LED lighting systems
HLP Series
Model information
C.C.： HLP-60H / HLP-80H
WATTAGE:
60W~80W
FEATURES:
90~305VAC input, built-in active PFC function)
Built-in 3 in 1 dimming function (1~10VDC, PWM signal
or resistance)
Suitable for built-in LED lighting systems
HBG(P) Series
Model information
PCB: HBG-60-P / HBG-100P(DA) / HBG-160P(DA) / HBG-240P
WATTAGE:
60W~240W
FEATURES:
90~305VAC input, built-in active PFC function [90~295VAC
for HBG-60(P)]
Built-in 3 in 1 dimming function (1~10VDC, PWM signal,
or resistance) for HBG-100(P)/160(P)/240(P) B type
Suitable for LED high/low bay lighting, stage lighting and
spot lighting
5 years warranty
LED Driver Outdoor Constant Current
ELG Series
Model information
C.V.+C.C.: ELG-75 / ELG-100 / ELG-150 / ELG-200 / ELG-240 / ELG-300
ELG-U: ELG-100U / ELG-150U
WATTAGE:
75W~300W
FEATURES:
100~305VAC input range
IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in
1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-
to-off); smart timer dimming; DALI; auxiliary DC output (ELG
-150 BE-Type)
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries
Suitable for LED street lighting and outdoor LED lighting
5 years warranty
ELG-C Series
Model information
ELG-75-C / ELG-100-C / ELG-150-C / ELG-200-C / ELG-240-C
WATTAGE:
75W~300W
FEATURES:
100~305VAC input range
Constant current (C.C.) output
Built-in active PFC function
No load/standby power consumption <0.5W
IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in
1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-
to-off); smart timer dimming; DALI; auxiliary DC output (ELG
-150-C BE-Type)
HVG Series
Model information
HVG-65 / HVG-100 / HVG-150 / HVG-240 / HVG-320 / HVG-480
WATTAGE:
65W~480W
FEATURES:
Wide input range 180~528VAC
Metal case, IP67/IP65 design for indoor or outdoor installations
Built-in active PFC function
Function options:output adjustable via potentiometer;
3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance,
dim-to-off); timer dimming; smart timer dimming
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries (except for HVG-65)
Suitable for LED street lighting and outdoor LED
lighting applications
HVG(C) Series
Model information
HVGC-65 / HVGC-100 / HVGC-150 / HVGC-240 / HVGC-320
WATTAGE:
65W~1000W
FEATURES:
Wide input range 180~528VAC
Metal case, IP67/IP65 design for indoor or outdoor installations
Built-in active PFC function
Function options:output adjustable via potentiometer;
3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance,
dim-to-off); timer dimming; smart timer dimming
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries (except
for HVGC-65/100)
Suitable for LED street lighting and outdoor LED
lighting applications
XBG Series
Model information
XBG-100 / XBG-160 / XBG-240
WATTAGE:
100W~240W
FEATURES:
Wide range 100~305VAC mains input
Built-in active PFC function and constant power mode
AC input cable with waterproof connector for flexible using
Surge protection: 6 KV /4KV
Protections: short circuit, over voltage, over temperature
Life time >50,000 Hrs. and 5 years warranty
LED Driver Outdoor Constant Voltage
HLG Series
Model information
HLG-40H / HLG-60H / HLG-80H / HLG-100H / HLG-120H / HLG-150H / HLG-185H / HLG-240H / HLG-320H / HLG-480H / HLG-600H
WATTAGE:
40W~600W
FEATURES:
90~305VAC input, built-in active PFC function
96% high efficiency (HLG-600H)
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in
1 dimming (1~10Vdc or 10V PWM signal or resistance);
timer dimming
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries
Suitable for LED street lighting, outdoor LED lighting and
general outdoor applications with high IP requirement
ELG Series
Model information
C.V.+C.C.: ELG-75 / ELG-100 / ELG-150 / ELG-200 / ELG-240 / ELG-300
ELG-U: ELG-100U / ELG-150U
WATTAGE:
75W~300W
FEATURES:
100~305VAC input range
IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in
1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-
to-off); smart timer dimming; DALI; auxiliary DC output (ELG
-150 BE-Type)
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries
Suitable for LED street lighting and outdoor LED lighting
5 years warranty
HVG Series
Model information
HVG-65 / HVG-100 / HVG-150 / HVG-240 / HVG-320 / HVG-480
WATTAGE:
65W~480W
FEATURES:
Wide input range 180~528VAC
Metal case, IP67/IP65 design for indoor or outdoor installations
Built-in active PFC function
Function options:output adjustable via potentiometer;
3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance,
dim-to-off); timer dimming; smart timer dimming
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries (except for HVG-65)
Suitable for LED street lighting and outdoor LED
lighting applications
LED Driver Outdoor with Dimming
ELG Series
Model information
C.V.+C.C.: ELG-75 / ELG-100 / ELG-150 / ELG-200 / ELG-240 / ELG-300
ELG-U: ELG-100U / ELG-150U
WATTAGE:
75W~300W
FEATURES:
100~305VAC input range
IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in
1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-
to-off); smart timer dimming; DALI; auxiliary DC output (ELG
-150 BE-Type)
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries
Suitable for LED street lighting and outdoor LED lighting
5 years warranty
ELG-C Series
Model information
ELG-75-C / ELG-100-C / ELG-150-C / ELG-200-C / ELG-240-C
WATTAGE:
75W~300W
FEATURES:
100~305VAC input range
Constant current (C.C.) output
Built-in active PFC function
No load/standby power consumption <0.5W
IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in
1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-
to-off); smart timer dimming; DALI; auxiliary DC output (ELG
-150-C BE-Type)
HLG Series
Model information
HLG-40H / HLG-60H / HLG-80H / HLG-100H / HLG-120H / HLG-150H / HLG-185H / HLG-240H / HLG-320H / HLG-480H / HLG-600H
WATTAGE:
40W~600W
FEATURES:
90~305VAC input, built-in active PFC function
96% high efficiency (HLG-600H)
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in
1 dimming (1~10Vdc or 10V PWM signal or resistance);
timer dimming
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries
Suitable for LED street lighting, outdoor LED lighting and
general outdoor applications with high IP requirement
HLG-C Series
Model information
HLG-60H-C / HLG-80H-C / HLG-120H-C / HLG-185H-C / HLG-240H-C / HLG-320H-C / HLG-480H-C
WATTAGE:
70W~480W
FEATURES:
90~305VAC input, built-in active PFC function
Constant current output with high output voltage >60VDC
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:output adjustable via potentiometer;
3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance,
dim-to-off); timer dimming; smart timer dimming
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries (HLG-240H
-C/320H-C only)
Suitable for LED street lighting and outdoor LED lighting
LED Driver Outdoor Circular Shape Design
XBG Series
Model information
XBG-100 / XBG-160 / XBG-240
WATTAGE:
100W~240W
FEATURES:
Wide range 100~305VAC mains input
Built-in active PFC function and constant power mode
AC input cable with waterproof connector for flexible using
Surge protection: 6 KV /4KV
Protections: short circuit, over voltage, over temperature
Life time >50,000 Hrs. and 5 years warranty
HBG Series
Model information
Case: HBG-60 / HBG-100(DA) / HBG-160(DA) / HBG-200(DA) / HBG-240(DA) / HBGC-300
PCB: HBG-60-P / HBG-100P(DA) / HBG-160P(DA) / HBG-240P
WATTAGE:
60W~240W
FEATURES:
90~305VAC input, built-in active PFC function [90~295VAC
for HBG-60(P)]
IP67/IP65 design for indoor or outdoor installations for HBG
-100/160/240
Built-in 3 in 1 dimming function (1~10VDC, PWM signal,
or resistance) for HBG-100(P)/160(P)/240(P) B type
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries (HBG-100/160 only)
Suitable for LED high/low bay lighting, stage lighting and
spot lighting