PRODUCT INTRODUCTION
Home
Product Introduction
LED Driver Plastic Case
AP Series
Model information
C.V.: APV-8 / APV-12 / APV-16 / APV-25 / APV-35
C.C.: APC-8 / APC-12 / APC-16 / APC-25 / APC-35
WATTAGE:
8W~35W
FEATURES:
90~264VAC input
Rectangular plastic case with IP42 level
Class II design, without FG
Low cost, small and compact size
Constant voltage mode for APV series
Constant current mode for APC series
Suitable for indoor LED lighting and moving sign applications
HBG(P) Series
Model information
Case: HBG-60 / HBG-100(DA) / HBG-160(DA) / HBG-200(DA) / HBG-240(DA) / HBGC-300
PCB: HBG-60-P / HBG-100P(DA) / HBG-160P(DA) / HBG-240P
WATTAGE:
60W~240W
FEATURES:
90~305VAC input, built-in active PFC function [90~295VAC
for HBG-60(P)]
IP67/IP65 design for indoor or outdoor installations for HBG
-100/160/240
Built-in 3 in 1 dimming function (1~10VDC, PWM signal,
or resistance) for HBG-100(P)/160(P)/240(P) B type
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries (HBG-100/160 only)
Suitable for LED high/low bay lighting, stage lighting and
spot lighting
LP Series
Model information
C.V.: LPH-18 / LPV-20 / LPV-35 / LPV-60 / LPV-100 / LPVL-150 / LPV-150
C.C.: LPHC-18 / LPC-20 / LPC-35 / LPC-60 / LPC-100 / LPC-150
WATTAGE:
18W~150W
FEATURES:
90~264VAC input (except for 18W and 150W)
Slim plastic case with IP67 level
Economical design
Withstand 300VAC surge input for 5 seconds
(LPV/C-20/35/60/100)
-30~70℃ wide operation range
Suitable for economical LED lighting and moving
sign applications
PCD Series
Model information
C.C.: PCD-16 / PCD-25 / PCD-40 / PCD-60
WATTAGE:
16W~60W
FEATURES:
16W/25W: 90~135VAC or 180~295VAC 40W/60W: 180~295VAC
AC phase-cut dimming, work with leading and trailing
edge TRIAC dimmers
Fully isolated plastic case with IP42 level
Built-in active PFC function
Class II design, without FG
Constant current mode
Suitable for indoor LED lighting
DLP-04 Series
Model information
Din Rail Type: DLP-04R
Slim Type: DLP-04L
WATTAGE:
4W
FEATURES:
90~295VAC full range input
Slim design
Plastic case with class II
No load/standby power consumption<0.5w( type L)
Withstand 300VAC surge input for 5 seconds
-20~+60℃ working temperature
Protections: short circuit / over voltage
LCM- IoT Series
Model information
LCM-25-IoT / LCM-40-IoT / LCM-60-IoT
WATTAGE:
25W~60W
FEATURES:
Constant Current output and adjustable by dip switch
Flicker-free design
Plastic housing and class II design without FG
Built-in active PFC function
Dimming functions: Bluetooth Mesh and Push dim
Surge protection with 2KV(L-N)
Protections: Short circuit/Over voltage/Over temperature
PWM-IoT Series
Model information
PWM-60-IoT / PWM-120-IoT / PWM-200-IoT
WATTAGE:
60W~200W
FEATURES:
Constant Voltage output with 12V/24V/48V
Flicker free design
Plastic housing and class II design without FG
Built-in active PFC function
Surge protection with 2KV(L-N)
Protections: Short circuit/Over voltage/Over temperature
NHDD Series
Model information
NHDD-40
WATTAGE:
40W
FEATURES:
Constant current mode output
For DC 380V BUS lighting luminaire driver on board
(DoB) solution available
Plastic housing and fully encapsolated
Built-in PWM and remote ON/OFF control
Protections: Short circuit / Over temperature
XLC Series
Model information
XLC-25 / XLC-40 / XLC-60
WATTAGE:
25W~60W
FEATURES:
Constant power design with wide range current adjustable
(H type)
Constant voltage output models available (12V/24V/48V)
Full voltage input 110~305VAC (with PFC function)
Plastic case with double insulation and Class II/2 design
Output and dimming circuit comply with isolation design
Standby power consumption <0.5W
Compliant with emergency lighting (EL) functions
Dimming function: 3 in 1, DALI-2; KNX, IoT (Optional)
XLN Series
Model information
XLN-25 / XLN-40 / XLN-60
WATTAGE:
25W~60W
FEATURES:
Constant power design with wide range current adjustable (H type)
Constant voltage output models available (12V/24V/48V)
Output current adjusted by NFC sensing
Full voltage input 110~305VAC (with PFC function)
Standby power consumption <0.5W
Fully encapsulated with IP67
Compliant with emergency lighting (EL) functions
Output and dimming circuit comply with isolation design
PLD Series
Model information
C.C.: PLD-16 / PLD-25 / PLD-40 / PLD-60
WATTAGE:
16W~60W
FEATURES:
16W: 90~135VAC or 180~295VAC; 25W: 90~295VAC;
40W/60W: 180~295VAC
Built-in active PFC function
Fully isolated plastic case with IP42 level
Class II design, without FG
Constant current mode
Suitable for indoor LED lighting
PLM Series
Model information
C.C.: PLM-12 / PLM-25
WATTAGE:
12W~40W
FEATURES:
110~295VAC input (180~295VAC input for E type)
Built-in active PFC function
Fully isolated plastic case with IP30 level
Class II design, without FG
Push terminal I/O
Constant current mode
No load power consumption<0.5W
Suitable for indoor LED lighting
LPF Series
Model information
C.V.+C.C.: LPF-16 / LPF-25 / LPF-40 / LPF-60 / LPF-90
C.C. (3 in 1 Dimming): LPF-16D / LPF-25D / LPF-40D / LPF-60D / LPF-90D
WATTAGE:
16W~90W
FEATURES:
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level (16W optional)
Class II design, without FG
Built-in 3 in 1 dimming function for D type (1~10VDC,
PWM signal or resistance)
Suitable for LED lighting and moving sign applications
5 years warranty
NPF Series
Model information
C.V.+C.C.: NPF-40 / NPF-60 / NPF-90 / NPF-120 / NPF-200
C.C. (3 in 1 Dimming): NPF-40D / NPF-60D / NPF-90D / NPF-120D
WATTAGE:
40W~200W
FEATURES:
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level
Class II design, without FG
No load/standby power consumption<0.15W (<0.5W for D type)
Built-in 3 in 1 dimming function (0~10VDC, PWM signal
or resistance, dim-to-off ) for D type
Type "HL" LED drivers for use in Class I, Division 2
hazardous (Classified) location luminaries [NPF-40(D)/-60(D)/-120(D) only]
Suitable for LED lighting and moving sign applications
PWM Series
Model information
C.V.: PWM-40 / PWM-60(DA) / PWM-90(DA) / PWM-120(DA) / PWM-200
WATTAGE:
40W~200W
FEATURES:
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level
Constant voltage PWM style output
Class II design, without FG
No load power consumption<0.5W
Built-in 3 in 1 dimming function (0~10VDC, PWM signal
or resistance, dim-to-off)
Suitable for LED strip lighting
5 years warranty
PLC Series
Model information
C.C.： PLC-30 / PLC-45 / PLC-60
C.V.+C.C.: PLC-100
WATTAGE:
30W~96W
FEATURES:
90~264VAC input, built-in active PFC function
Fully isolated plastic case with screw terminal style of I/O
Suitable for indoor LED lighting and moving sign applications
PLN Series
Model information
C.C.: PLN-20 / PLN-30 / PLN-45 / PLN-60
C.V.+C.C.: PLN-100
WATTAGE:
20W~96W
FEATURES:
90~295VAC input (90~277VAC for PLN-20), built-in active
PFC function
Fully isolated plastic case with IP64 level
Suitable for indoor LED lighting and moving sign applications
HLN Series
Model information
C.V.+C.C.: HLN-40H / HLN-60H / HLN-80H
WATTAGE:
40W~80W
FEATURES:
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP64 level
Built-in 3 in 1 dimming function (1~10VDC, PWM signal
or resistance) for B type
User adjustable output voltage and current level for A type
Suitable for indoor LED lighting and moving sign applications
LCM Series
Model information
3 in 1 Dimming: LCM-25 / LCM-40(EO) / LCM-60(EO)
DALI Dimming: LCM-25DA / LCM-40DA / LCM-40TW / LCM-60DA
WATTAGE:
25W~60W
FEATURES:
180~295VAC input for 40W/60W, 180~277VAC input for 25W
Constant current mode
Built-in active PFC function
Multiple-stage output current level selectable by DIP switch
Built-in 3 in 1 dimming function for non DA type (0~10
VDC, PWM signal or resistance, dim-to-off)
Built-in DALI interface and push dimming function for DA type
DALI device type 6 (DT6) and device type 8 (DT8) available
for LCM-40TW
Suitable for indoor LED lighting applications
LCM-U Series
Model information
3 in 1 Dimming: LCM-40U(EO) / LCM-60U(EO)
DALI Dimming: LCM-40UDA / LCM-60UDA
WATTAGE:
40W~60W
FEATURES:
DALI Dimming： LCM-40UDA / LCM-60UDA
Constant current mode
Built-in active PFC function
Multiple-stage output current level selectable by DIP switch
Built-in 3 in 1 dimming function for non DA type (0~10
VDC, PWM signal or resistance, dim-to-off)
Built-in DALI interface and push dimming function for DA type